Specifications and release history for RX3i IC695PNC001
ATTENTION: Applications using CPE3xx Version 10.05 (or later) with a PNC001-Bxxx must also upgrade the PNC to Version 3.16 (or later) for compatibility with the controller. This is applicable only if you are using a CPE3xx (CPE302/305/310/330). The PNC001 (Bxxx or later) needs to be upgraded as well for compatibility with CPE3xx controllers running firmware 10.05 or later.
Go here to download version 3.16 PNC firmware kit:
IC695PNC001 - PACSystems RX3i PROFINET Controller
PACSystems RX3i PROFINET Controller, IC695PNC001 (GFK-2573)
-
Attached Files
-
GFK-2573AG_IC695PNC001-BFBE_IPI.pdf
GFK-2573AG – Adds support for pending PROFINET version 2.45 IO-Controller certification for simplex and MRP operation
-
GFK-2573AE_IC695PNC001-BFBE_IPI.pdf
GFK-2573E - Resolves invalid overtemperature indications that may result in resets.
-
GFK-2573AD_IC695PNC001_IPI.pdf
GFK-2573AD: PACSystems RX3i PROFINET Controller (PNC) Release 3.25 adds support for MRP Fiber SFP Ring break detection during a single fiber break.
-
GFK-2573AC_IC695PNC001-BFBE_IPI.pdf
GFK-2537AC: Manufacturing components issues.