Important Product Information PACSystems™ RX3i CPUs, IC695CPE302-Axxx & IC695CPE305-Axxx (GFK-2714) ka3QA000000fNofYAE | Emerson Customer Center

Important Product Information PACSystems™ RX3i CPUs, IC695CPE302-Axxx & IC695CPE305-Axxx (GFK-2714)


  • Id:
  • 000052558
  • Legacy Id:
  • DO2349
  • Average User Rating:
  • Your Rating:
  • Last Updated: Wed Mar 12 19:00:23 GMT 2025
  • Date Created: Thu Sep 29 10:47:16 GMT 2011
  • Products: PACSystems RX3i
  • Categories: Data Sheets/IPIs

Product information and release history for RX3i CPU with Ethernet IC695CPE302-Axxx & IC695CPE305-Axxx

ATTENTION: Applications using CPE3xx Version 10.05 (or later) with a PNC001-Bxxx must also upgrade the PNC to Version 3.16 (or later) for compatibility with the controller. This is applicable only if you are using a CPE3xx (CPE302/305/310/330). The PNC001 (Bxxx or later) needs to be upgraded as well for compatibility with CPE3xx controllers running firmware 10.05 or later.   

Go here to download version 3.16 PNC firmware kit, IC695PNC001 - PACSystems RX3i PROFINET Controller

  • Attached Files

  • GFK-2714AP_IC695CPE302_305_IPI.pdf

    Posted: 12/13/2024

    GFK-2714AP: Firmware release 11.1 adds support for configuring IC695PNC001-Bxxx, Release 3.30 new features, sending new COMMREQs for PROFINET asynchronous RDO read and write operations to the IC695PNS001-Bxxx, and resolves numerous issues found in previous releases.

  • GFK-2714AN_IC695CPE302_305_IPI.pdf

    Posted: 11/14/2023

    GFK-2714AN: Adds support for Run Mode Store (RMS) to User Flash, SVC_REQ 63 Logic Driven Data Write to Non-Volatile Storage, and three diagnostic %S bits. This release also resolves the issues found in the Problems Resolved in this Release section.

  • GFK-2714AM_IC695CPE302_305_IPI.pdf

    Posted: 5/24/2023

    GFK-2714AM: Adds support for IC695CHS007/CHS012/CHS016-JC or later 7/12/16-slot backplanes.