IC693CPU363 - Series 90-30 CPU ka31t0000004aJlAAI | Emerson Customer Center

IC693CPU363 - Series 90-30 CPU

Product History
Rel.Ver.DateIPIUpgrade KitNew FeaturesProblems Resolved
DL10.75Oct-09GFK-1512S44A747766-G10NASee GFK-1512S
DK10.74May-08GFK-1512R44A747766-G09NASee GFK-1512R


Loss/add of module faults with IC693ALG222/223

MOVE_REAL operation

Config Not Equal with DSM324

PID Function Block


ATEX Certification


support for 32-bit register data to the Modbus RTU

Using Port Setup COMMREQs to alternate between Serial I/O and SNP may cause the serial daughterboard to reset

SNP slave protocol on Port 1 may fail to re-attach to the master.

Serial ports 1 and 2 always disconnect from SNP master when hardware configuration is downloaded

Daughterboard version number displayed incorrectly

Firmware update may fail after following power-up with Clear M/T and a write to flash


Modbus RTU Master protocol now available on ports 1 and 2


CPU won't handle 11K byte smart module init file

Load of large (>32K) DSM zip files fails





Rotate Right and Rotate Left functions do not handle error condition correctly

Time of Day Clock at powerup may not operate

Error when run-mode storing, loading, or verifying exactly 50 blocks in run mode

Fatal Fault retry does not work correctly for some faults


Hardware Update to Enhance EMC Performance


IC693DSM314 support added

Local Logic Programs with VersaPro 1.10

Reboot after Fatal Fault

Drum Sequencer function

User Flash Write and Erase Failure

PLC can Automatically go to Run Mode

Retentive Contact Previous Values Table not being cleared


AI & AQ Above Default Values

Embedded Serial Ports with Rev.9.00 and 9.01 Firmware

Load File of Size 1528 Bytes

C Program with Code Area Greater Than 64K Bytes


Break-free SNP

SNP Master mode on CPU Ports

Online Changes to Reference Tables

Read from Flash

To download the firmware, go to - IC693CPU363 - Series 90-30 CPU Firmware

  • Attached Files

  • GFK1512S.pdf

    Posted: 5/30/2018

    Series 90-30 CPU Modules with Firmware Release 10.75 IC693CPU363-DL

  • GFK1512R.pdf

    Posted: 5/20/2008

    IC693CPU363-DK, v. 10.74

  • GFK1512P.pdf

    Posted: 1/17/2008

    IC693CPU363-DJ, v. 10.74

  • GFK1512N.pdf

    Posted: 3/24/2006