/communities/CC_Knowledge
IC693CPU311 - Series 90-30 CPU
- Id:
- 000036421
- Legacy Id:
- DO643
-
Average User Rating:
-
Your Rating:
-
Last Updated:
Mon Jan 13 02:29:44 GMT 2020
-
Date Created:
Thu Jan 06 16:22:00 GMT 2005
- Products:
Series 90-30
-
Categories:
Data Sheets/IPIs
Product History
| Rel. | Ver. | Date | IPI | Upgrade Kit | New Features | Problems Resolved |
| AE | 8.40 | May-01 | GFK-0702ab | N/A |
- Battery now ships with CPU and not with the Power Supply
| |
| AD | 8.40 | Jan-00 | GFK-0702aa | 44A731233-G16 |
- Ignore Fatal Fault Feature
| |
| AC | 8.21 | Oct-98 | GFK-0702z | |
|
- FBC Editing with HHP
- Storing Foreign Module Configuration to Slot 1
- End Function Block
- SVC REQ 7
|
| AB | 8.20 | Mar-98 | GFK-0702y | |
- Break-free SNP (improves modem compatibility)
|
- HHP Write to Flash or EEPROM with IC641 Programmer Connected
|
| AA | 8.00 | Oct-97 | GFK-0702x | | | |
| Z | 8.00 | Jun-97 | GFK-0702v | |
- Support for Larger Configuration File
- Model Number Checks Removed
| |
| Y | 7.00 | Feb-97 | GFK-0702u | |
- UL Class I DIV 2 Hazardous Locations approval
| |
| X | 7.00 | Nov-96 | GFK-0702t | | |
- ALT-S in Stop Mode
- HHP Overrides
- HHP Coil Use
- HHP Subroutines
|
| W | 6.61 | Jun-96 | GFK-0702s | |
- Bumpless Run Mode Store
- PID Function Block Enhancement
|
- Write Datagram
- Zeroing Input Data of a Failed Module
- Storing Folder to EEPROM
|
| V | 6.51 | Mar-96 | GFK-0702r | |
- Multiple Backplane and SNP Sessions
|
- Storing a Maximum Size Program Block
- Adding Smart Modules
- Reconfiguring Smart I/O Modules
- Multiple Channel Connections
- Update Utility Error Messages
- Configuring Smart Modules with the HHP
- PLC Software Fault
- SFC Reset
- SNPX Interrupted Message
|
| U | 5.03 | Jul-95 | GFK-0702q | | |
- SNPX Power-Cycle Recovery
|
| TX | 5.01 | Feb-95 | GFK-1149 | |
- CPU slower than current production models, runs at 8MHZ
| |
| T | 5.01 | Feb-95 | GFK-0702n | | |
- DINT Function Block with Constant Parameter
- Clearing I/O Fault Table with GBC Present but not Configured
|
| S | 5.00 | Dec-94 | GFK-0702m | |
- BEM331 Genius Bus Controller
- Sequential Function Chart Programming
- Automatic Baud Rate Detection
- Katakana HHP Display
|
- PLC State After Error During Device Read
- SNP Conformance
- SNPX Access to System References
- Noise Immunity
- Store Fault Registration Delay
- Brown-Out During SNPX Session
- OIT Response
- Day of the Week
- Modem Turnaround Time
|
| R | 4.50 | Nov-94 | GFK-0702l | |
| |
| M, P | 4.50 | Aug-94 | GFK-0702j | |
| |
| N | 4.40 | Feb-94 | GFK-1008 | |
- CPU clock frequency increased from 8MHz to 10MHz
| |
| L | 4.40 | Feb-94 | GFK-0702g | |
- OffDelay (OFDTR) Function 14
- Active and Constant Sweep Modes
- SVCREQ #26: Interrogate I/O
- SVCREQ #23: Read Master Checksum
- Masked Compare Word (MSKCMPW) Function 143
- Masked Compare Dword (MSCCMPD) Function 144
- Number of Enhanced GCMs Allowed
- SNPX Protocol
- I/O Link Master Module
- Window Modes
- Run-Mode Store
- Range Function Block
|
- Retentiveness of %G References
|
-
Attached Files
-
Posted: 1/6/2005
IC693CPU311AE