Important Product Information RX3i 1GHz 64MB CPU w/Ethernet IC695CPE330 (GFK-2942) ka3QA0000004KkvYAE | Emerson Customer Center

Important Product Information RX3i 1GHz 64MB CPU w/Ethernet IC695CPE330 (GFK-2942)


  • Id:
  • 000052556
  • Legacy Id:
  • DO2566
  • Average User Rating:
  • Your Rating:
  • Last Updated: Fri Dec 15 15:03:56 GMT 2023
  • Date Created: Wed Apr 01 16:32:07 GMT 2015
  • Products: PACSystems RX3i
  • Categories: Data Sheets/IPIs

Important Product Information RX3i 1GHz 64MB CPU w/Ethernet IC695CPE330

Basic Product Information and Release Notes.


ATTENTION: Applications using CPE3xx Version 10.05 (or later) with a PNC001-Bxxx must also upgrade the PNC to Version 3.16 (or later) for compatibility with the controller. This is applicable only if you are using a CPE3xx (CPE302/305/310/330). The PNC001 (Bxxx or later) needs to be upgraded as well for compatibility with CPE3xx controllers running firmware 10.05 or later.   

Go here to download version 3.16 PNC firmware kit, IC695PNC001 - PACSystems RX3i PROFINET Controller

  • Attached Files

  • GFK-2942AC_IC695CPE330_IPI.pdf

    Posted: 12/15/2023

    GFK-2942AC: IC695CPE330 64MB CPU w/Ethernet Firmware Release 10.92 resolves the issues found in Problems Resolved by this Revision of the IPI.

  • GFK-2942AB_IC695CPE330_IPI.pdf

    Posted: 5/24/2023

    GFK-2942AB: Release of IC695CPE330-AFAU and Firmware 10.85 adds support for -JC or later IC695CHS007/CHS012/CHS016 7/12/16-slot backplanes.

  • GFK-2942AA_IC695CPE330_IPI.pdf

    Posted: 2/28/2023

    GFK-2942AA: Resolved two problems: 1) Added security enhancements to harden the product against a malicious actor. 2) CPE330 R10.80 and ACC402 Energy Pack R4.02 correct issues that may prevent the CPU from retaining its user memory after a power cycle when its Logic/Configuration Power-up Source or Data Power-up Source are set to Always RAM or Conditional Flash.